Mountix

Sanand, Gujarat · since 2023

The steel that
holds the sun.

Cold-formed mounting structures for solar — purlins, rafters and table sections rolled to your drawing, cut to length and bundled the way your crew will build.

Start an RFQView selected work
100+MW

Mounted on Mountix steel

Every section leaves the line traceable to the coil it was rolled from and the note it travelled on. That is what lets a crew open a bundle and build a table, rather than sort steel in a field.

Clients

  • Deon Energy Limited
  • Bipendu Fabricators
  • Sonnect
  • URJA Solutions
  • Prozeal Green Energy Limited
  • Global Polyweave
  • Torrent Urja
  • Aarti Power
  • Nimkhal
  • Shakti Techtex
  • Shanti Faumach

What we roll

Four profiles, rolled to the millimetre you specify.

C-Lip Channel

The workhorse of a module table — purlins, rafters, columns and bracing. Lipped for stiffness against the wind load the array has to carry for twenty-five years.

Web
60–275 mm
Thickness
1.2–3.15 mm
Length
to 5.8 m

Hat Purlin

Rolled in long single lengths so a table spans with fewer joints, which is fewer bolts on site and fewer places for a fixing to work loose.

Web
40–70 mm
Thickness
0.9–1.6 mm
Length
to 7.1 m

U Channel

Plain channel for framing and secondary members, rolled to the same tolerances as everything else that leaves the line.

Web
70–80 mm
Thickness
2–3 mm
Length
to 1.6 m

L Angle

Angles for bracing and fixing details, cut to length so nothing has to be trimmed on site.

Web
40–40 mm
Thickness
5–5 mm
Length
to 1 m

Something else?

If the design calls for a section we don't list, send the drawing. Most of what we roll started as somebody's drawing.

Send a drawing →

The portfolio

Recent projects, to scale.

One mark per recent project, sized by capacity — ground-mount, rooftop and custom structures. Across our full history: 32+ clients and over 100 MW of arrays standing on steel we made.

31 recent projectslargest approx. 9.86 MW

Delivery footprint

Steel on the road, across India.

Customer and project locations we serve, from our works at Sanand — 6 states, from the Thar to Bengaluru.

  • Gujarat · 25
  • Rajasthan · 3
  • Maharashtra · 6
  • Uttar Pradesh · 2
  • Chhattisgarh · 2
  • Karnataka · 2
Mountix works, Sanand

Selected work

Structures we've delivered.

Sanchore

Rajasthan, India

Confidential client

Fixed-tilt ground-mount table structures, engineered against the module layout and manufactured complete.

Capacity
approx. 5.8 MW
Supplied
145 MT

Gokhlana

Gujarat, India

Sonnect

Fixed-tilt ground-mount table structures, engineered against the module layout and manufactured complete.

Capacity
approx. 5.2 MW
Supplied
130 MT

Jetda

Gujarat, India

Bipendu Fabricators

Fixed-tilt ground-mount table structures, engineered against the module layout and manufactured complete.

Capacity
approx. 4.7 MW
Supplied
116 MT

URJA 2P28

Gujarat, India

URJA Solutions

Fixed-tilt ground-mount table structures, engineered against the module layout and manufactured complete.

Capacity
approx. 3.7 MW
Supplied
94 MT

Rolled to your drawing

Sections are formed to the profile the design calls for, not selected from a catalogue and made to do. Web, flange, lip and thickness are set per member.

Cut to length, bundled to the table

Members arrive cut, counted and bundled the way the site will use them, so a crew opens a bundle and builds a table rather than sorting steel.

Traced from coil to delivery

Every section is tied to the coil it was rolled from and the delivery note it left on. If a question is asked six months later, it can be answered.

Scheduled against your build

Production is planned around the sequence the site erects in, so the first tables can go up while the last are still being rolled.

Materials

Galvalume AZ150
550 MPa

The default for module mounting — aluminium-zinc coated for coastal and open-field exposure.

Galvalume AZ200
550 MPa

Heavier coating mass where the site is harsher or the design life is longer.

Posmac ZM450
500 MPa

Zinc-magnesium-aluminium, for corrosion performance beyond conventional galvanising.

Pre-galvanised
E210 · HDGI 80

Where a galvanised finish is specified over a mild-steel base.

Mild steel
E250 · E350

Structural grades for members that are galvanised after fabrication.

Send us the drawing. We'll send back the steel.

Bill of materials, table configuration, or a sketch on a napkin — whatever stage you're at, we can price it.

Start an RFQ